DIY Carnival masks

I found this molds here, and I tried to do it, the result is above.

What we need:

• scissors,
• pen,
• felt, I used red ad black,
• double tape.

How to:

1. Print the draw you want to use to your mask. You can find a few at the end of this post, If you don't have a printer use tracing paper in your computer monitor;
2. With the pen draw the outside lines of the mask on the felt;
3. Cut the felt;
4. Cut of the mask eyes;
5. Repeat the steps 1-4 for the other mask elements (the black pieces on the pictures), use a different felt color;
6. Apply double tape n the back of the small mask ornaments, like in pictures;
7. Cut out the excess tape, use good scissors ;
8. Apply the small pieces on the mask;
9. Place the mask on your restless face and mark the holes to pass through the elastic;
10. Use the paper punch or the scissors to do a small hole;
11. Place the elastic; you may want to reinforce the hole with a small piece of felt.

Note:

• You may apply glitter to give some light to your mask;
• You can paint it;
• Use more then 2 colors for a crazy look;
• etc. 

Et voilá!

Enjoy!